Gilles TECA-GT chain adjuster blocks are a direct replacement for your bike’s mass-produced units. These chain adjuster blocks eliminate the slop associated with many OEM chain blocks that makes getting the correct chain tension after a wheel change difficult. With the Gilles adjuster blocks installed on your bike, you can expect chain tension to remain nearly constant as you tighten up the axle bolt after a wheel change. Don’t trust the OEM axle position marks either - the TECA-GT chain adjuster blockes make compensating for your bike’s often incorrect alignment marks easy with a simple worm gear adjustment tab.

To adjust chain tension, slightly loosen your bike’s axle, and adjust both Gilles blocks until you get the tension you want. Gilles also makes swingarm lifters and axle sliders that bolt directly onto the TECA-GT for extra utility. The TECA-GT adjuster blocks are an updated design that draws upon the experience of the original Gilles chain adjusters for greater strength and ease of use.

Available for 2004 and up Honda CBR1000RR

These are not yet available on our website. Call TJ at 866.931.6644 ext 817 so he can get you everything you need. Available only black you can email TJ for expert service – FORUM at RIDERSDISCOUNT dot COM is the address – be sure to include the model and year of your motorcycle for accurate availability.

Sold in pairs.
http://www.ridersdiscount.com/forum/gilles/chain_adjuster_gilles_tca_gt_black_2.jpg

High-quality machine work means no rough edges anywhere and a precise, slop-free axle that makes chain slack adjustment easy.
http://www.ridersdiscount.com/forum/gilles/chain_adjuster_gilles_tca_gt_black_3.jpg

http://www.ridersdiscount.com/forum/gilles/chain_adjuster_gilles_tca_gt_black_4.jpg

Machined tabs for the installation of swingarm lifters and sliders.
http://www.ridersdiscount.com/forum/gilles/chain_adjuster_gilles_tca_gt_black_1.jpg

An internal worm gear sets axle block length in a millimeter perfect manner. Gilles even provides the correct hex key.
http://www.ridersdiscount.com/forum/gilles/chain_adjuster_gilles_tca_gt_black_5.jpg


Don't forget to get some swingarm lifters and a rear axle nut while you're at it ...
The lifters bolt on with ease.
http://www.ridersdiscount.com/forum/gilles/swingarm_lifters_gilles_black_1.jpg


The Safety-Lock rear axle nut has a plastic detent in it that helps prevent it from backing out. Available for bikes with 22, 24 and 25mm axle diameters.
http://www.ridersdiscount.com/forum/gilles/rear_axle_nut_gilles_safety_lock_silver_ 1.jpg

All it takes is the twist of the included Allen key and you're safe for the road.
http://www.ridersdiscount.com/forum/gilles/rear_axle_nut_gilles_safety_lock_silver_ 2.jpg