someone fuckin tell me how to get the fuckin swing arm off, my brother erased my manual, douche bag

for real, i got a 15/16 bolt in it with two nuts twisted together on the shaft so i can torque with the wrench, is that how it comes off, someone help me out

Cutting torch is the fastest. j/k uhdunno. weeeee

fuck you buddy, hahaha, someone hook it up, go look at yer fuckin manuals or something

now do me a favour and tell me how to fuckin remove my rear swingarm please

what bike?

the 954, the swinarm pivot has a 15/16ths bolt dealy where you have to insert basically a huge hex, im using a bolt thats that size, i gave it a good push but it did not budge

im not sure what im doin

I think there is 2 little 12mm screws or hex screwunder the pivot that squeezes the mid frame to the pivot bolt..if those are loose then you might need to take some weight off the swingarm and lift up and push on the pivot botl orwith a wide end screw driver or extention or what ever else you can fit in there with out messing up the thread and knock on it with a hammer lightly till it pops out..make suer the bike is stable before doing it..

thanks ima hit that bitch now it must just need to be popped out, thanks