took me forever, my front tire would always lock up. if i lean forward just a little it grabs. i get them up like a little over a foot so far, just getting the hang of it.

i feel like i can do endo's, you know what i mean? Like you know how to do it you just havent yet....got any tips on endos??? no one in my area has ever done them....id like to be the first

the best way I could get to do it was going about 40 or so I would get on the brakes hard and compress the forks, when they wer compressed I would give it more brake and lean a little forward, I could get it a couple of feet off the ground and ride em for a couple of seconds and I would let off the brake.

I got scared one time my rear got too high and I stopped trying em.

Hmmmm, might have to try that.

you will lay it over, eventually
ever since I tried to roll over painted brick & lost it, I don't do 'em @ least not rolling ones
not really enough satisfaction vs. risk of f*'en up the ride, @ least not on the purty bike
I am piecing together a stunter, then it will be on
I just have to stop spending $ on the purty one, long enough to finish it up

you will lay it over, eventually
ever since I tried to roll over painted brick & lost it, I don't do 'em @ least not rolling ones
not really enough satisfaction vs. risk of f*'en up the ride, @ least not on the purty bike
I am piecing together a stunter, then it will be on
I just have to stop spending $ on the purty one, long enough to finish it up


yea make sure you have good asphalt or concrete to do it on, cause the front will slide if not.

that last one was concrete, it just had that one strip of painted brick
I have spent about $2k in the last month on the '54
still havent touched the suspension
as soon as this stops I will finish up the stunter

I hear ya...Slippery asphault almost ended up causing rr crash #3 :(

Good thing these bikes are tougher than nails...

I hate to say it, but Im gonna stunt out the 54 and get a 600rr for the street...Maybe...Ohhh choices...So many sweet red bikes, so little time...