Does anyone have a site online where i can order like the screws and bolts for the plastic arround my 954? i noticed one was missing and i wantto replace it and get a few more while im at it to keep just in case...

click on the superbikesupply logo at the top of the page. Brad can hook you up. Call him if you don't see on his site whatever it is you're ever looking for because there's no doubt he can get it for you at a very reasonable price.

I too am soon going to get a stock pile of them lil plastic pita's

Go here...http://www.ronayers.com/fiche/getyear.cfm?man=ho&groupid=5320.
You can get all the hardware you need for the bike here as well.

thanks guys ...:thumbup:

at least give superbikesupply.com a chance. they do alot for this site

I got this
http://www.mototuning.biz/catalog/images/KIT1.jpg
full bike kit in the gold
pretty sweet

I got this
http://www.mototuning.biz/catalog/images/KIT1.jpg
full bike kit in the gold
pretty sweeti found where you got them from ...im assuming id order the ones for the 02 cbr 950 ...it doesnt say 954 ...and would they be the same from a 02- 03 because my 954 is a 03???

Brad can get them for ya, for a good price
that is the compleate kit
you dont have to get all of them
theres the fairing, engine & frame kits

yea it seems like they always f up the #'s over in europe
both years of the 954 are the same
@ least as for as bolt kits go

I dont know if there are cheaper ways to go
but if red, blue or gold fit in w/ your bike its pretty slick
I couldnt find a compleate Ti bolt kit,
but that would be @ least twice the price of these

Medic how about psoting a picture of those sweet ass forks.

what yo think I wouldnt throw them up here?
http://www.1000rr.com/vb/showthread.php?p=69140#post69140
if I could hack into the program of the forum they would be the background of the entire board

Brad can get them for ya, for a good price
that is the compleate kit
you dont have to get all of them
theres the fairing, engine & frame kits

yea it seems like they always f up the #'s over in europe
both years of the 954 are the same
@ least as for as bolt kits go

I dont know if there are cheaper ways to go
but if red, blue or gold fit in w/ your bike its pretty slick
I couldnt find a compleate Ti bolt kit,
but that would be @ least twice the price of theseyea i think ill see what brad could do or find for me ...thanks again

FlightMedic954, can you post a picture of your bike, I'd like to see what the gold bolts look like so i caqn decide if i want to get them.

yea but it will be about a week or so
I am a few thousand miles from it

I can usually match up most nuts, bolts, and fasteners at Home Depot, Checker Auto, or other similar places. Usually saves me a little time.

I can usually match up most nuts, bolts, and fasteners at Home Depot, Checker Auto, or other similar places. Usually saves me a little time.

Did you ever get your bolts off? The loc-tite still holding tight? lol

Yeah, I got 'em off! Heated them up and got a couple off that way. Then managed to get my hands inside and got a couple more off. Just kept working at it till I got them all. It SUCKED!
HAHAHAAA!

WOO HOO!!!!!!

I thought your oil was never gonna get changed. hahaha

http://www.imagestation.com/picture/sraid198/paa6dc1f5ef7e013753ce0a316c9e45cd/f0c9eeab.jpg
http://www.imagestation.com/picture/sraid198/p652272774e8383f275a4c444adb2b38a/f0c9f154.jpg
I have only put the panel bolts in
when I break down the swingarm later this month & put the new covers on I will put the rest on

I will get better/ closer pics later

me likey

That's pretty good looking! A very nice touch that works great with the carbon fiber. I like it too!

the screws are a cool touch, Im not sure I would do it again there kinda expensive

I am thinking about jumping into a full C/F faring & maybe even the C/F tank
that would be some pimp shit
as long as youse dont call me turbo

i would think about doing that also ...but that seems like its pretty expensive ....id have to wait a while if i wanted some CF body panels ...post some pics up if you do though :thumbup:

yea it is expensive, Im going back & forth
I think I may have a few other things to get before I put down for the C/F body
I am just wondering if I need to get them while they still have them
since my bike is going on 3 yrs old

the only reason i wouldnt though is because i like my bike with the red and black ...

well they sure look cool & are light weight
but there sure not very strong
putting the stator cover on, which calls for 9lbs of torque
they break a bit before 9lbs
fortunately I was able to wrestle it out the back
I then torqued them between 6-7lbs
hopefully w/ the RTV silicon it wont leak
http://gntbldr.com/coppermine/albums/userpics/normal_IMG_0224%5B1%5D.jpg
hell you cant even see most of the bolts on the stator once the faring is on
http://gntbldr.com/coppermine/albums/userpics/normal_IMG_0220%5B1%5D.jpg (javascript:;)

This is why I always... Always use stainless steel bolts.

I figure the weight savings is just not worth it... Medic yo were lucky you got that off.